chlorine generator

salt cell picture

To optimize chlorine generator performance, manufacturers recommend that service technicians visually inspect the cell every three months. Today‘s units remind users to do this by displaying the message inspect or clean cell after a preset length of time. Maximum 90 days without cleaning. Many units have a self-cleaning feature, which keeps the cell working at optimum efficiency. This automatic cleaning is accomplished by reversing the cell polarity every few hours, reducing any calcium build up.

Nonetheless, there are areas where the water is hard, or has a high mineral content, which can lead to scale. Some filters allow debris to pass through the cell, and it sometimes lodges between the plates in the cell. In all of these cases, the self-cleaning feature may not be adequate, and manual cleaning is necessary.

If it is determined that there is excessive scale formation between the plates or, if debris is present, the cell may be cleaned using the high-pressure jet from a garden hose. If the cell can not be can not be reasonably cleaned with this technique, it should acid-cleaned. To acid clean the cell, turn off the power to the unit, either by switching off the filter pump or setting the circuit breaker to off. Mix one quart of muriatic acid, with one gallon of water in a plastic bucket. Always add acid to water, never the reverse.

The equipment manufacturer Pentair Water Pool and spa offers an electrolytic cell acid cleaning kit for their popular Intellichlor chlorine generators. The kit includes an O-ring, a washer, and a cap to allow acid to be poured into the electrolytic cell plates for cleaning. It also serves to protect the sensitive areas of the cell during washing. Remove the unit from the pool‘s plumbing system by unscrewing both unions from the unit. Placing the O-ring in the washer, and the washer in the cap, screw the cap on the Intellichlor unit.

Place the cell vertically in a five-gallon bucket with the cap end down. Pour the acid solution into the cell until the blades are just covered. Allow the acid solution to bubble to clean the blades. The acid should only be contained in the cell and not around it. The bubbling is caused by the scale, which is calcium carbonate, being dissolved from the plates, if rigorous foaming action does not begin, the cell does not need to be cleaned. Otherwise, allow the cell to remain in the solution until the foaming has stopped. It is not recommended to leave in acid in the cell for more than 30 minutes because excessive acid washing will damage the cell.

Remove the cell from the bucket and place in an empty five-gallon bucket. Rinse the cell thoroughly with clean tap water and inspect for remaining deposits. If visible deposits are present, immerse the cell again in the solution for further cleaning. Additional acid may need to be added to the solution. Rinse the cell again with clean tap water and inspect. If the cell appears to be clean, remove the cap, o-ring, and washer, which can be used for future use. Replace the cell and resume normal operation. If this acid washing procedure is necessary, it is recommended that a sample of pool water be analyzed for excessive hardness or improper water balance. Excessive calcium levels cause scale and should be monitored or frequent cell cleaning will be necessary.

On the other hand, if no scale or debris deposits have been observed in the cell after two bimonthly inspections, it may not be necessary to continue these bimonthly inspections. Nonetheless, it is still a good idea to remove the cell for inspection at least twice a year because of possible changes in pool water chemistry and filtering effectiveness.

iChlor Salt Chlorine Generator

The technology behind the iChlor Salt Chlorine Generator makes it so simple to use. Just add salt and iChlor does the rest; automatically producing a steady stream of pure chlorine for softer, silkier pool water that’s free of bacteria and other contaminants.

Touch pad controls enable fast checking of salt levels, chlorine output and cell life. The i Chlor with Smart Sense™ Flow Detection prevents the generation of chlorine when the IntelliFlo® Variable Speed Pump is not activated.
NEW PRODUCT ANNOUNCEMENT

iChlor™ Salt Chlorine Generator
salt chlorine generator picture

Introducing the easiest, most effective
and convenient way to sanitize your
pool!
The technology behind the iChlor Salt Chlorine
Generator makes it so simple to use. Just add salt and
iChlor does the rest; automatically producing a steady
stream of pure chlorine for softer, silkier pool water
that’s free of bacteria and other contaminants.
Touchpad controls enable fast checking of salt
levels, chlorine output and cell life. The iChlor with
SmartSense
Flow Detection prevents the generation
of chlorine when the IntelliFlo
Variable Speed Pump
is not activated.

SMART TECHNOLOGY FOR HEALTHIER, PURER POOL WATER

ORDINARY TABLE SALT. EXTRAORDINARY TECHNOLOGY.
Just add salt to generate all the chlorine your pool needs. Our smart technology provides built-in intelligence for unmatched convenience and control.

Features

  • Adjust the sanitizing level in 1% increments for 1-100% to achieve the precise level of chlorine.
  • Detects IntelliFlo® Pump activity. Prevents the generation of chlorine when the pump is not activated.
  • Seamlessly interfaces with Pentair EasyTouch and IntelliTouch Automation Systems. Used with ScreenLogic2 Interface, you can control it from anywhere at any time – even from your Apple Watch

riverside pool service

riverside pool service helps keep the pool looking great and clean.

Keeping a swimming pool clean is a lot harder than what people think. However, people should know about the professional swimming pool cleaning in riverside  and how this helps to keep the pools perfectly clean and ready  swim  at any point and time.

riversidepoolrepair.

Properly vacuuming the pool is one of the first steps the professional cleaners will do. When the pool is properly vacuumed it tends to remove all the debris from the bottom of the pool and even gets the sides free from the algae which may be growing on the pool wall.

Balancing of the chemicals is another thing which people will enjoy with the professional cleaning. The main issue people have to deal with is the chemicals and getting them balanced just right for the pool to work properly. With the professional cleaning companies, they have the right test kits and can guarantee the chemicals are balanced properly.

Having a swimming pool is a great way to stay cool in the hot summer months. However, people will find it is very difficult for them to keep the pool clean all the time because of the constant attention this requires. This is when people should know how the professional swimming pool cleaning in riverside pool service helps keep the pool looking great and clean.

The most popular type of pool is in-ground, and this is because in-ground pools are easy to access and are more durable than their above-ground counterparts. The only drawback to an in-ground pool is that they require a great deal more pool service than other models, and this is because their systems are often more intricate and problems aren’t as easy to identify. Homeowners with an above-ground pool are still in need of pool service through  Pool Service riverside , though, and this is because much of the damage that these pools are subjected to is difficult to identify and then repair without proper expertise.

Professional Swimming Pool Cleaning In riverside Ca Helps Keep Pools Ready For Swimming

High Performance Pump WhisperFlo

High Performance Pump

The IntelliFlo 011018 Variable Speed

Robust thermoplastic with the Cam & Ramp “see thru” lid design. Self-priming, high flow with patented Funnel-Flo diffusers. 2 in. suction and discharge ports. Motor features threaded shaft and durable commercial duty 56 frame motor with NEMA square flange.

Features

  • 2-speed WhisperFlo pump models are now ENERGY STAR® Certified: meets strict energy efficiency criteria set by the U.S. Environmental Protection Agency and the U.S. Department of Energy.
  • Oversized strainer basket and volute – industry standard in pool pumps.
  • Standard and Energy-efficient Square Flange Motors available.
  • Lower HP’s deliver higher performance than industry standard.
  • Compatible with all cleaning systems, various filters and jet action spas.
  • Heavy-duty/durable construction is designed for long life.
  • Designed for residential and commercial applications.
  • New motor increases life, energy, efficiency, ease of installation and better cooling for long service life.

Pool Patio and Coping Options

Pool Patio 101

 On this page we’re going to discuss patio coping options.  If you are unsure what coping is, it’s the area where the pool patio meets the pool edge.  In some of the pictures you’ll notice that certain pools have a separate border immediately around the pool, and some have the same material throughout the entire patio without a separate border.  These are different types of coping.  It’s important to understand this because as you look at inspiration photos throughout this page, and anywhere else for that matter, you will notice multiple combinations of copings and patio materials.  Understanding the distinction between coping and patio will help you better understand why you prefer one look to another.

How Much Patio Do I Need?

Typically speaking, most folks need between 600 and 900 square feet of patio around a pool…enough room for a table and chair set, some chase lounges, and enough to comfortably walk around the perimeter of the pool.  If you’re planning to install the pool next to an existing patio or deck, you can probably get by with less.  If you’re planning to accommodate large groups of people, or incorporate other elements such as an outdoor kitchen or fire pit you’ll likely need more.

“We just wanted to thank you for far exceeding our expectations with our new pool. The pool itself is absolutely gorgeous and everyone associated with River Pools has been professional.” Mr. and Mrs. Scott Hawley, Mechanicsville, VA More Client Testimonials

Pool Patio and Coping Options



When trying to adhere to a budget like everyone does, it’s important to follow the principle of consolidation.  We simply mean that you want to put as much patio as possible in your congregating areas, and only enough everywhere else to be functional and aethstetically pleasing.

For example, let’s say your budget allows for 800 square feet of patio around the pool.  The very worst use of that space would be to evenly distribute 8′ of patio around the entire pool.  Why? Because you would be without any single place to congregate and have more area than you need around much of the pool.

The best use of that space would be to consolidate as much of that 800′ into one or two areas as possible.  You may have 12′ of patio along one side of the pool and have 8′ on the shallow end, and three or four feet on the other two sides.  Or you could have 16′ on one end and 4′ or 5′ around the segmental_block_retaining_walls_2-resized-600rest of the pool….you get the idea.  This is a much better us of your money and space.

Make Sure You Get Enough Patio…or Plan to Add-On in the Future

With that being said, it’s important to note that the most common mistake new pool owners make is that they do not get enough patio when they initially get the pool.  So it’s important to make the best use of your patio through proper design, but it’s also important to make sure that you are getting enough patio to meet your needs.  Many clients find it

beneficial to implement their total backyard design in phases.  If this is planned right, it allows them to have the pool installed so it meets their needs for a season.  Then they implement the next phase later which adds more patio, outdoor kitchen, fire pit, etc.

River Pools and Spas Logo_Colored.png
error: Content is protected !!